RT Systems WCS-7100, Руководство пользователя

Страница: 182 / 197

WCS-7100 Radio Programmer Help 182
© 2021 RT Systems, Inc.
not critical in memory mode since the original memory channel frequency can be
retrieved by exiting Memory Tune mode.
Enter 5/10/12.5/15/20/25/50 or 100 as needed.
Clock Shift : Shifts the internal reference frequency slightly to eliminate "birdies" that
interfere on other channels.
Enter On or 1 / Off or 0
Tx Power : The output power can be set individually for each memory channel to
address the exact needs of each operation.
Enter High / Med / Low
Half Deviation : Enter On or Off as needed for the channel.
Comments : Enter an identifying comment up to 80 characters.
You can see by the details here that creating a file for import can be a tedious process.
Although this process is very valid for transferring data from one radio Programmer to
another and for using the data from other sources such as ARRL Travel Plus, it is not
recommended for original file creation.
Let the Programmer help you as you create your original file with its defaults and
automatic settings. Once the file is created you could export the data for other uses.
The comma-delimited file can contain this information in any order. It must contain only
the Receive frequency to be a valid memory channel. The Programmer makes no
assumptions about the information available. If a piece of information is omitted, the
Programmer imports the memory as a simplex channel and fills other fields with
defaults.
This data can be entered in any order. You will identify the specifics to the Programmer
during the Import process. If you find after several entries that you need another column
for additional information, simply add it at the end. The Programmer will correct the
order when it imports.
Save the data in your file often to prevent loss. Be sure to save the file as text with
delimiters (separators) rather than as a worksheet of the program in which you are
working. The Programmer cannot use a worksheet created by the other program.
To save as a text file, select File | Save (in the spreadsheet program). In the Save file
window, select a different file type from the selection at the bottom of the screen.
Acceptable formats are those that specify Text (i.e., .cvs, or .txt file extension).