44
Doc. No.
：
P30001PE0101-07
Press “SHIFT” and the down arrow to move the cursor to the right, from HH
(hours) to MM (minutes). Press “SHIFT” and the up arrow to move the
cursor to the left, from MM to HH.
Press the up arrow or down arrow to increase or decrease
the value of the selected field.
After setting the time, store the setting by pressing “ENT”.
Alternatively, press “ESC” to leave the time unchanged.
9.3.3.
Setting the serial port
This setting configures the serial port for using a PC
as the output device for the report file.
Press ”3” in the system setup menu to change the setting of the serial port.
The following screen appears:
“CS” (current setting) indicates the current setting of the serial
port as “PC” or “Not Used”.
Press the up arrow or the down arrow to change the “NS”
(new setting) field to “PC” or “Not Used”.
If
“Not Used” is selected a report file will not be generated/sent to the PC.
Press “ENT” to store the new setting. Alternatively, press
“ESC” to leave the current setting unchanged.
9.3.4.
Setting the preventive maintenance reminder
Press ”4” in the system setup menu to change the settings for
the preventive maintenance reminder.
The following screen appears:
Press the up arrow or the down arrow to change the
“Interval” field to
“1/2 year” (semiannual) or “1 year” (annual).
After setting the new interval, store the setting by pressing
“ENT”.
Alternatively, press “ESC” to leave the current interval unchanged.
SETUP: TIME
HH:MM
Key:
Up,Dn,SHIFT,ENT,ESC
SETUP: SERIAL PORT
Current: CS
Set: NS
Key:Up,Dn,ENT,ESC
SETUP: REMINDER
PM Interval
Key:Up,Dn,ENT,ESC
