- -
11
5. Connecting to TV / Digital Amp (5.1CH)
Connect only one of the two terminals between OPTICAL and COAXIAL for Digital Audio output
< NOTE >
▪
Remove the dust protection cap from the OPTICAL digital audio output and connect the cable firmly so that
the configurations of both the cable and the connector match.
▪
Keep the dust protection cap and to protect against dust, always reattach the cap when not using the
connector.
Concerning the audio output from the units OPTICAL audio output connector
DISC
Sound recording format
OPTICAL audio output
Dolby Digital
Dolby Digital bit stream (5.1CH) or
PCM (2CH) (96kHz/24bit)
Linear PCM
(48/96 kHz 16/20/24 bit)
Linear PCM (2CH)(48kHz/16 bit only) or no output
DVD
Bit stream or no output
VIDEO CD
MPEG 1
PCM (44.1 kHz)
CD
Linear PCM
Linear PCM (44.1kHz)
▪
The type of audio output from the connector can be selected by the initial setting.
▪
Sound having 96 kHz sampling is converted into 48 KHz sampling when it is output from the unit’s digital
audio output connector.
*
Dolby Digital (AC-3)
is a digital sound compression technique developed by thy Dolby Laboratories
Licensing Corporation. Supporting 5.1-channel surround sound, as well as stereo or mono sound, this
technique enables a large quantity of sound data to be efficiently recorded on disc.
