- -
27
TROUBLE SHOOTING
WARNING!
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
Check other connected equipments (Amp, Monitor, etc) since they may be a cause of trouble.
If a fault occurs, first check the points listed below before taking the system for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or us for help.
Tray does not come out.
Check if the AC cord is plugged in correctly.
The set does not play the Disc
Check if the Regional Display Number of the Disc is 3 or All. The Disc you bought abroad may not work.
Check if you inserted the Disc with its printed side up.
After I press the PLAY button, it takes long before displaying the image
If you press PLAY/STOP/OPEN buttons quickly again and again, the set stops all movement for certain
duration of time to protect the Disc drive monitor.
Check if your batteries are strong enough.
No power
Check if the AC power cord is properly connected.
Press the ON-OFF button on the front of the DVD system to turn on the power.
No picture
Refer to your TV’s manual for correct Video In channel selection. Change the TV channel until you see
the DVD screen.
Check if the TV is switched on.
Distorted picture
Sometimes a small amount of picture distortion may appear depending on the disc being played back.
This is not a malfunction.
Completely distorted picture or black/white picture with DVD
Connect DVD Player directly to the TV.
Make sure the disc is compatible with the DVD/ Player.
Ensure that the DVD Player’s TV System is set to match that of the Disc and your TV.
No sound or distorted sound
Adjust the volume.
Check the connections among equipments (Amp, TV, and Speaker) and initial settings.
Check if the Disc is not harmed and cleanse the Disc.
Check if the speaker is inferior. If so, exchange it.
No audio at digital output
Check the digital connections.
Check if your receiver can decode MPEG-2 or DTS and if not, please make sure the digital output is set to PCM.
Check if the audio format of the selected audio language matches your receiver capabilities.
Poor sound quality
Check the connections with Amp.
Check if the connection plugs are not loosened.
Check if the connection terminals have foreign substances stained.
Check the sound volume settings of each audio device and adjust it.
Microphone does not work
Check if microphone is switched ON.
Check if the sound volume of Amp is fixed at the minimum lever and then adjust it.
Check if the microphone is inferior. If so, exchange it.
