RSP Compact Series, Руководство по установке и обслуживанию

Страница: 15 / 22

M0416-1 version 3.2 15
3.2.4 Cleaning and lubrication of tool attachment
The following maintenance activities should be carried out on the TA every 6th month or
after 250,000 tool changes, whichever comes first.
Action Note
Clean locking cavities Clean the cavities of the
locking balls with a lint free
cloth.
NOTE!
It is important that this is
done or else there is a risk
that the tool attachment
jams.
Clean contact surfaces of air sealings Wipe the contact surfaces
of the air sealings clean
with a lint free cloth.