www.rslogger.com
Termite (by CompuPhase) application with RSLogger’s AT commands interface (Windows 7)
For more information about AT command interface usage please refer to AT command list, parameters and syntax
explained in the “
AT commands (via USB Virtual COM)”
chapter.
Via Ethernet
On Ethernet enabled RSLogger versions it’s possible to download data from
WWW interface. Any Internet browser can be used (PC or mobile device
connected to the same LAN). Enter the “
http://rslogger/
” as a domain or it’s IP
number directly if known like 192.168.1.52 assigned by DHCP in the examples
below (method recommended on Apple Safari and mobile browsers).
RSLogger’s WWW data download page.
Navigate to the LOG menu allowing you to download the data from the internal memory buffer. Select the request date
range and apply it by “Set Data Range” button. Read Log button would be activated then – press it to search and
download the data from requested date range. It would take a while to dowlnoad the data, please wait. The current
status would be displayed with percentage indicator below text area window. Notice that all non printable characters
logged (controll ASCII characters) logged, would be displayed as converted to text (del character or space) depending
your WWW browser. Please use the Mass Storage data download mode to get ASCII binary text file stored in the
format exactly like it was logged (including all non printable control characters).
13 ©
Electroware
2018
