RSI XL600, Полное руководство по установке и программированию

Страница: 23 / 30

2011/11/28 E2.5 Installation Manual for XL600GPRS
23 | P a g e
User Functions
The user can arm and disarm the system.
The user has to acknowledge the events after disarming the system or in disarmed mode.
Arming the system:

Wake up the touchpad

For a full arming (AWAY mode)
o
Put your badge on the reading area => if the badge is programmed into the panel,
the system will arm automatically.
o
Enter you code and press OK or the full arming key

For a STAY arming
o
Enter you code and press OK or the STAY arming key
o
A badge cannot be used to arm the STAY profile
Disarming the system:

Wake up the touchpad

Put your badge on the reading area => if the badge is correct, the system will disarm
automatically.

Enter you code and press OK or the disarming key
Acknowledging events:
After the disarming or in disarmed mode, the user shall acknowledge all events.
In case of multiple events, each event must be acknowledged.
Each event is presented in two steps:

First step => the touchpad shows the event category
o
for low batteries
o
for detection during arming or for tamper
o
for intrusion or detection
o
for other troubles
The user has to acknowledge this step by pressing .

Second step => the touchpad shows the ID of the concerned device
o
0 for the panel
o
1 to 19 for a device
The user has to acknowledge this step by pressing .