RSI XL600, Полное руководство по установке и программированию

Страница: 21 / 30

2011/11/28 E2.5 Installation Manual for XL600GPRS
21 | P a g e
How to Mount the Control Panel and GPRS Test
Once the system is mounted you will need to check the GPRS level again to make sure it is adequate
.
Codes Error Fix
043
Authentication Error Double check and re-enter your APN,USERNAME, and PASSWORD
003
SIM card not detected Power down the unit and re-insert the SIM card
132
SIM card not activated Contact the cellular provider for activation
030
No GPRS signal available Try re-locating the panel or checking a online coverage map for the
carrier
048
Signal Attempt Rejected Check the IP address, Domain Name, and Port

How to Mount the Control Panel?
Fix the back casing on the wall
with 4 screws (

) and one
screw for the tamper (

)
.




10/12/27 10:53
DISARMED LVL:3
GPRS LEVEL
TEST IN PROG.
YES = END
Press the

arrow to move to MAINTENANCE.
Press the

arrow to move to GPRS LEVEL.
GPRS LEVEL
Press and hold ESC/NO for 5 seconds to return to the main
menu.
This test can take up to 5 minutes to complete. Pressing the
YES, ESC/NO, or CLR buttons will prematurely end the test.
This test will automatically issue the results to the display of
the keypad when it has completed with either a level out of 5
(0/5-5/5) or an error code (listed below). Use the arrow keys
to keep the keypad away during the test.

YES


YES
MAINTENANCE
GPRS LEVEL
X/5
Press YES on GPRS LEVEL to start the test.