2011/11/28 E2.5
Installation Manual for XL600GPRS
14 |
P a g e
Entering a Badge or Access Code for Arming/Disarming
After Initial programming has been completed, you are not able to arm and disarm the system until
you enter a user code or badge (the installer code cannot arm and disarm the system). Codes can
be 4-6 digits and the 4
th
digit must be 2 values higher or lower than any other code on the system:
Example: User code 1234, next code cannot be 1235, 1236, 1233, or 1232
– These are reserved for
Silent Duress and Audible Duress. The XL system can accept up to 19 Badges or Access codes in
any combination.
10/12/27 10:53
DISARMED LVL:3
BADGES ACCESS
CODES
BADGE OR CODE
****
ENTER A
BADGE/CODE
BADGE OR CODE:
****
YES
Badge
Presented
Press the
arrow to move to BADGES ACCESS CODES.
Enter the Installer code.
Enter a 4-6 digit user code or present a badge to the reader
for 2 seconds.
NAME OF BADGE:
CONFIRM THE
CODE:
CODE NAME:
ENTRY COMPLETE
ENTER A
BADGE/CODE
YES
Use the keypad to name the badge or code or leave it blank
for the default name : ACCESS #.
If you are entering any additional codes press YES. If you
have completed entering Badges and Codes press and hold
ESC/NO for 5 seconds to return to the main manu.
Confirm the code by re-entering.
YES
YES
YES
YES
Содержание XL600
