RSI XL600, Полное руководство по установке и программированию

Страница: 9 / 30

2011/11/28 E2.5 Installation Manual for XL600GPRS
9 | P a g e
CODE/STATE modification
These are the default transmitted events:
Device
Alarm
Alert Alarm
Initialization Not Transmitted
Panel Batteries Alarm/End
AC Power Alarm/End
Phoneline Fault Not Transmitted
Tamper Alarm/End
Device Batt. Alarm/End
Radio Jamming Not Transmitted
Supervision Alarm/End
Periodic Test Alarm
Wrong Codes Not Transmitted
Duress Code Alarm
Alarm Memory Not Transmitted
Arm/Disarm Not Transmitted
If you would like to change the state press

YES and
use the

or

to toggle between:
Alarm
– Appearance
Alarm/End
– Appearance and Restoral
Not Transmitted
– Not Transmitted
If you would like the default press ESC/NO

YES

YES

YES
DATE (Minutes) :
10:00
DATE (Minutes) :
10:53
03/06/09 10:53
ENTRY COMPLETE
CONNECTED TO
MONITOR.STATION?
ACCOUNT NUMBER?
ACCOUNT NUMBER:
########
PERIODIC TEST:
24 HOURS

or

for period selection
and

YES to apply
CODE/STATE
MODIFICATION ?
AREAS
CONFIGURATION
AREA NAME 1:
EXIT DELAY:
45 sec
Other values are available:
2 min, 1 min, 45 sec
Use the arrows for the selection and

YES to confirm.
Other values are available:
2 min, 1 min, 45 sec, 30 sec, 15 sec
Use the arrows for the selection and

YES to confirm.
ENTRY DELAY :
30 sec

YES

YES
Use the

or

to set the minutes.

YES
Use the Alphanumeric Keypad to enter in 4-8 digit account
number provided by the Central Station
Wait
ESC/NO
YOU MUST ALWAYS CHOOSE ‘YES’
TRANS. STATE
MODIFICATION
List of all
events

ESC/NO
Use the Alphanumeric Keypad to name the area and press

YES. Repeat for all areas. If you want to keep the default
area names press the ESC/NO key.
The system will send a test to the central station every 24
hours.
Make sure the test is between 24:00 and 04:00.