![background image](http://html.mh-extra.com/html/rs/1327/1327_instruction-manual_1495801017.webp)
15
Alarm point) setting mode.
Press the
▲
or
▼
button until the display reads100.0
℃.
f). Pull the trigger to store the setting and exit the setting mode.
g
ε
(Emissivity): Press
▲
or
▼
to adjust the value.
h
▲
: Button for increasing the value. Hold down to increase
the parameter value rapidly.
i
▼
: Button for decreasing the value. Hold down to decrease
the parameter value rapidly.
Note:
After the setting procedure is terminated, the
parameter will be stored until changed.
Under setting mode, the backlight, laser, memory store
and read functions are disabled.
Pull the trigger to exit setting mode.
Ⅸ
.
BATTERY REPLACEMENT
When the symbol
+
appears on the LCD screen, there is
insufficient power in the battery to provide an accurate
measurement.
Replace the battery with a fresh one as follows:
a) Ensure the instrument is turned off
b) Open battery compartment cover on the rear of the grip.
c) Remove the exhausted battery from the compartment.
d) Fit a new battery of the type given in the specifications .