12
button and then pull the trigger to turn the meter on
and
enter
continuous measurement mode. The
H
symbol will not be
visible in the LCD, indicating the Hold function is disabled
c
To exit continuous measurement mode: Pull the trigger to
stop continuous measurement and turn the meter off.
d
MAX/MIN reading: When in continuous measurement mode,
press the
MODE
button once to cycle through maximum (MAX),
minimum (MIN) and current reading (MAX/MIN) modes.
Press and hold the
MODE
button for 3 seconds to exit this
mode.
Note:
Laser offset: The laser beam is offset 18mm(0.71in) from
the focal lens. Choose a sampling spot that is large enough
to include the laser offset.
Surface Temperature: The thermometer will measure the
temperature of the first surface it detects, e.g. a glass cover,
dust or fog. Ensure the object whose temperature is to be
measured is not obstructed.
4. Selecting
o
C/
o
F
units:
When the instrument is turned on, the units that appear in the
LCD are the last units measured. To change the temperature
units, pull the trigger to turn the meter on, then press and hold
MODE
for 3 seconds until the “SET” mark appears on the LCD.
Deleted:
to
