RS PRO RSPD3303C Скачать руководство пользователя страница 2

Страница: 2 / 31

General Safety Summary

Please review the following safety precautions carefully to avoid

personal injury or damage to this product or any product connected

to it. To prevent potential danger, please use the instrument as

specified.

Use proper power cord

Only the power cord designed for the instrument and authorized by

local country could be used.

Power supply

AC Input Voltages: 100V/110V/220V/230V ±10%, 50/60Hz.

Use proper fuse

The fuse types: 100V/110V(T6.3A/250V) 220V/230V

(T3.15A/250V)

Make sure to use the correct type of fuse before turning on the

instrument.

Do not connect the power cord before replacing the fuse.

Find out the reason why the fuse burned out before replacing the

fuse.

Ground the instrument

The instrument is grounded through the protective terra conductor

of the power cord. To avoid electric shock, the grounding conductor

must be connected to the earth. Make sure that the instrument is

properly grounded before any inputs or outputs.

Observe all terminal ratings

To avoid fire or electric shock, please observe all ratings and

symbols on the instrument. Read this guide carefully to know more

details about the ratings before connection.

Содержание RSPD3303C
































Результаты поиска

Содержание RSPD3303C

Отзывы:

Похожие инструкции для RSPD3303C

Бренды по названию

Популярные бренды

RS PRO RSPD3303C, Быстрый старт

Результаты поиска

Содержание RSPD3303C

Отзывы:

Похожие инструкции для RSPD3303C

Бренды по названию

Популярные бренды