RS PRO LCR 1701, Инструкция по эксплуатации

Страница: 23 / 29

22
Electrical Specifications
(1) Test Frequency :
Range Resolution Accuracy
100.00 Hz 0.01 Hz ± 0.01%
120.00 Hz 0.01 Hz ± 0.01%
1.0000 kHz 0.1 Hz ± 0.01%
10.000 kHz 1 Hz ± 0.01%
100.00 kHz 10 Hz ± 0.01%
(2) Test Signal :
AC Signal Level : 600mVrms
AC Signal Accuracy : ±10%
DC Bias Level : 1V
DC Bias Accuracy : ±10%
(3) Test Cable :
Model Length Bandwidth Type
SMD Test Probe 60cm 1MHz 5-Wire
4-Wire Test Probe 60cm 1MHz 5-Wire
Alligator Clip Set 15cm 1kHz 2-Wire
Accuracy : ± (A x B) (% of reading)
A : Basic Accuracy as specified by
B : Test Cable Accuracy
B(%) = 1 + (L x F x T)
L(m) : Cable Length
F(MHz) : Test Frequency
T : Cable Type. If the cable is 5-Wire type, the "T" is 40, and the
other is 4,000.
When measuring by basic accuracy that following
conditions must be met :
1. Ambient temperature : 23°C ± 5°C < 80%RH.
2. Test cable length : 0 m
3. Open and short corrections have been performed.
4. D ≤ 0.1 for C, L measurements; Q ≤ 0.1 for R measurements.
See the operation manual for additional conditions.