RR Mechatronics RPI Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 98

background image

1

Introduction

Read this manual, especially the standard operation procedure and

Safety instructions

, before using the

instrument.

1.1 - About this manual

This manual describes all necessary procedures and information required for the correct and successful use

of the RPI, covering normal operation, user maintenance and troubleshooting. When instrument is

mentioned, it is used for the complete instrument, the RPI including the AFS-24 unit.

This manual is applicable for the following RPI-models and concentrated reagents:

A0021587 RPI-ECO21 (120V), for DxH Concentrated ECO Diluent C67249 (Beckman-Coulter).
A0021595 RPI-ECO21 (230V), for DxH Concentrated ECO Diluent C67249 (Beckman-Coulter).
This manual does not describe specific service related issues, such as detailed technical information and

repair procedures.
The manual found with your RPI is important for proper usage and maintenance in compliance with the

manufacturer specifications.
Your RPI is delivered with these documents:
An "

Instruction for Use" which describes all specifications, operations, user functions and user maintenance

of the RPI.
A "

User manual AFS® 8, 16, 24" which describes all specifications, operations, user functions and user

maintenance of the AFS-24 (WPU).
It may be necessary to reference these documents for maintenance or other procedures with the RPI. It is

recommended to store these documents in such way that they can be quickly located and where they will

not be damaged.
Updates of this manual and RPI software will be published on our website, distributors will be informed

about updates. Electronic versions of this manual and versions in available languages and future revisions

are available on:
https://support.rrmechatronics.com

1.2 - Used symbols

This ATTENTION symbol is used to refer to instructions in this manual that need to

be done carefully.

Introduction

8

MRN-184-EN Version 6 (05-01-2022)

«
...
6
7
8
9
10
...
»

Содержание RPI



































































































Отзывы:

Нет отзывов

Похожие инструкции для RPI

Бренд: Kawai Страницы: 142

Бренд: Kawai Страницы: 10

Бренд: C-LOGIC Страницы: 4

Бренд: Wavetek Страницы: 43

Бренд: Larson Davis Страницы: 536

Бренд: PASCO Страницы: 3

Бренд: PASCO Страницы: 2

Бренд: NanoPhotometer Страницы: 133

Бренд: DeltaOHM Страницы: 26

Бренд: Van Walt Страницы: 2

Бренд: Ntron Страницы: 29

Бренд: Velleman Страницы: 38

Бренд: Rebel Страницы: 28

PA 900 Musikant

Бренд: Korg Страницы: 20

Бренд: Young Страницы: 7

ProSense LPM1 Series

Бренд: Automation Direct Страницы: 29

ISOLGUARD HIG93

Бренд: hakel Страницы: 15

Бренд: B&K Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды