RR Mechatronics RPI Скачать руководство пользователя страница 66

Страница: 66 / 98

Operational precautions, limitations and

hazards

The RPI and the incorporated WPU should be operated according to the instructions in this manual and the

manual of the WPU (AFS24). In particular, the hydraulic and electrical specifications should be followed and

met. It is important to use this equipment as specified in this manual; using this equipment in a different

manner may impair the safety precautions of the instrument.

IMPORTANT! Your RPI should be installed and operated in a clean and dry area. Please refer to the

environment requirements.

General

▪

The RPI is not designed for domestic use.

▪

Use this instrument only as the stated

intended use

. The user is not protected in case of any other use

(including use of not original or prescribed parts).

▪

When the instrument is not used (including overnight), the water supply must be closed to avoid water

spillage accidents.

▪

Any serious incident that has occurred in relation to the instrument must be reported to the distributor

and/or manufacturer and the competent local authorities.

▪

This device complies with the FCC RF exposure limits and has been evaluated in compliance with

mobile exposure conditions. The equipment must be installed and operated with minimum distance of 20

cm of the human body.

▪

The USB-port on the outside of the instrument is only to be used for data export. All other (internal)

USB-ports are only for use by the instrument, not for external devices.

Operation

▪

Read the instructions before operating the instrument. Observe all cautionary markings in the manual

and on the instrument. Keep this manual for future reference.

▪

Do not spill fluids on to the instrument. This could cause a short-circuit. If this happens, turn the main

switch OFF immediately and unplug the power cable. Contact your Service Representative.

▪

Do not place any objects on the instrument.

▪

The instrument panels may only be removed by trained personnel.

▪

If there is any doubt about proper instrument use and functionality, contact the distributor.

▪

Maintenance and repairs are only to be performed by trained Lab Technicians or a Field Service

Engineer.

▪

If the RPI has to be shut off for a long period of time, at first the shut down cycle has to be performed

by a trained Field Service Engineer. Contact your Service Representative.

Operational precautions, limitations and hazards

MRN-184-EN Version 6 (05-01-2022)

Содержание RPI



































































































Результаты поиска

Содержание RPI

Отзывы:

Похожие инструкции для RPI

Бренды по названию

Популярные бренды

RR Mechatronics RPI, Инструкция по эксплуатации

Результаты поиска

Содержание RPI

Отзывы:

Похожие инструкции для RPI

Бренды по названию

Популярные бренды