Cool discharged hot water
The WATER-MIZER is a water saving and tempering
device that efficiently mixes cold water with steam conden-
sate discharged from sterilization equipment, such as a
steam sterilizer, to reduce the discharged water tempera-
ture before it enters a municipal sewer system.
There are two reasons to use a water tempering
device. First, most municipalities prohibit draining water
hotter than 140°F (60°C) into their sewer systems. And
second, PVC drain pipes are susceptible to damage from
water that is too hot. When faced with either of these
situations, the WATER-MIZER is the solution!
Most steam sterilizers use continuous cold water to
temper the steam condensate, which is wasteful. The
WATER-MIZER monitors the drain temperature and
applies cold water only when needed!
Horizontal design!
WATER-MIZER’s space-efficient horizontal orientation and
side drain outlet provide enough clearance to allow it to be
mounted directly underneath most steam sterilizers, saving
footprint space while allowing room for pitched drain pip-
ing.
How it works: Hot + cold = tempered!
Steam condensate discharged from your sterilization
equipment enters the WATER-MIZER through piping
connected to the top threaded connection. A vacuum
breaker prevents backflow into potable water systems.
Cold water enters through the temperature-actuated
valve. The valve and the WATER-MIZER’s straight
forward design ensure efficient mixing of hot and cold
water. The valve’s sensor, located near the outlet,
ensures that water leaving the WATER-MIZER is
140°F (60°C) or less before entering the municipal
sewer system.
Tempered water at 140°F (60°C) or less exits through
the side outlet for safe discharge into a municipal
sewer system.
WATER-MIZER
®
features summary.
Reliable, non-electric valve
The temperature-actuated valve is time-tested to be
reliable. And because it is non-electric, no wiring is
required!
Built in thermometer
The WATER-MIZER has a built in thermometer for
easy calibration and continuous monitoring of
effluent temperature
Multiple mounting options
The WATER-MIZER can be mounted by attaching
the integral mounting plate directly to the frame of
the sterilization equipment or by attaching the
mounting plate to an adjustable floor stand. (See
Page 8 to order the Adjustable Floor Stand, RPI
Part #RPH470). These multiple mounting options
provide capability for the WATER-MIZER to be
properly supported and not secured entirely by pip-
ing.
Product overview
Product overview:
Summary of features
1
L
3
L
2
L
1
L
1
L
2
L
3
