A
D
D
E
E
C
C
C
B
C
To connect the skimfilter, cut about 7 cm of PVC pipe and connect the skimfilter exit to the elbow
90º. Then, cut enough PVC tube to reach the ground.
Clean both accessories with a cloth, apply the PVC glue on the accessories in order to unite, as shown in the
photograph.
According to the draft, glue an elbow 90º and connect it to the flexible hose that will be linked to the pump.
CONNECTION OF SKIMFILTER TO THE PUMP
17
Pump and Hydraulic system connection
IMPORTANTE:
It is essential that the filtering system is in conformity to standard C 15-100, which requires that
all electrical equipment located less than 3.5 m of the pool must be supplied with low voltage:
12V and all electrically powered device 220V must be located more than 3.5 m from the pool or
indoors.
The auto- aspirant pump must not be installed above the water level.
A
C
C
D
D
A
C
C
D
D
E
PUMP AND HYDRAULIC
SYSTEM CONNECTION
A
D
E
C
B
Skimfiltre
Elbow 90º
Outlet Nozzle
PVC pipe
Flexible PVC hose
Way of water circulation
25
