13
20
1.5 cm
1
3
2
1
2
3
4
Fixation of the protective steel panel
The fixation of the steel panel is initiated by the skimmer wall.
Place two steel panels making their sides overlap by approximately 1.5 cm. Apply the self-tapping screws at 3 points in the
middle of the pillar, as shown in the photograph, and screw the panels.
Once you have screwed all steel panels, apply the aluminum adhesive tape to hide the screw head
(1).
Apply aluminum tape between the steel panels and coping metal support parts
(2)
, also on the junction of the steel panels
and the base structure panels
(3).
Use the same procedure to put aluminum tape on the joints of the accessories panel
(4)
.
Placing the aluminum tape
IMPORTANT:
Check and make sure that the steel panels are straight and perfectly fixed on the pillars.
Repeat this process for all panels.
