After screwing the flanges, cut the liner inside the flanges, using a cutter.
Once the placement and screwing of the outlet nozzle and skimfiltre
flanges are done, place the mirror as shown in the illustrations.
After installing the liner and filling the pool up to 30 cm from
the middle of the mouth of the skimmer, you should locate
the previously placed joints on the outlet nozzle and Skimfiltre.
Then, overlap the joint and the flange of the parts and make the first hole, screwing the first screw.
Once the second screw is placed all the other holes will be in the right position.
31
21
Placement of sealing rings
