RPB RADEX AIRLINE FILTER, Инструкция по эксплуатации

Страница: 15 / 24

15
Thread the 04-915 Pressure Gauge and
04-966 1”NPT Connector into the 04-962
Super High Flow Regulator and tighten. Now thread the complete Regulator into the
INLET port on the body of the Radex
®
Filter
Unit and tighten or connect it to the inlet of
the Micro Mist Filter or the Main Line Prefilter.
SUPER HIGH FLOW REGULATOR ASSEMBLY
FIGURE 4.5 FIGURE 4.6
To fit the Auto Drain Unit, screw the unit
onto the elbow connector on the draining
valve. Make sure the unit is straight down
so it will drain properly.
FIGURE 4.4
FITTING THE AUTO DRAIN UNIT
To fit the Main Line Prefilter onto the Micro
Mist Filter, thread the 1/2” Hex Connector
04-952 into the Main Line Prefilter then
thread it into the Micro Mist Filter inlet
and tighten, ensure both units positioned
straight.
FIGURE 4.3
FITTING THE MAIN LINE PREFILTER IN LINE
WITH THE MICRO MIST FILTER