RPB RADEX AIRLINE FILTER, Инструкция по эксплуатации

Страница: 11 / 24

11
BASE MOUNT - GROUND
To connect the base mount align the arrows
on the base mount with the arrows on the
filter.
Using the holes in the legs of the base
mount, bolt the unit to the ground,
preferably concrete, to prevent tipping over
and causing injury or damage to the unit.
Use 3/8” (10mm) bolts or lag screws to
secure the base to the ground.
The base mount will only fit in two
positions, the arrows must align before
locking. Turn the filter in a clockwise
direction and lock into position. You will
hear a click when the base is in the final
position.
FIGURE 1.1 FIGURE 1.2
FIGURE 1.3
BASE MOUNT - WALL
The base mount can also be used to mount
the filter to a sturdy wall. Use bolts to
secure the base mount to the wall through
the holes in the legs. Secure the Radex to
the base mount once secured to the wall.
The bolts/screws must be able to hold the
approximate 20lbs. weight of the unit.
FIGURE 1.4