16
NOVA
1
®
If you choose to use a 3mm outer lens
instead of the standard 0.4mm outer lens
(02-811) and tear offs (02-816), unscrew
the visor from the helmet. Remove the two
spacers and rotate them so that the “3” is
upright to indicate 3mm lens.
Secure the visor in place with the “3” next
to the arrow on the visor by reinserting the
screws. Make sure the screws go into the
nuts of the support bracket on the inside of
the helmet.
Place the 3mm outer lens into the visor.
Make sure the inner lens is also in place.
FIGURE 3.4
FIGURE 3.5
FIGURE 3.6
RESPIRATOR SETUP AND CARE
CONTINUED
LENSES
CONTINUED
