6
NOVA
1
®
RESPIRATOR COMPONENT DIAGRAM
The RPB
®
NOVA 1
®
respirator consists of 3 main components. All 3 components must
be present and properly assembled to constitute a complete EN 14594 and AS/NZS 1716
approved Compressed Airline Breathing Apparatus.
CAUTIONS AND LIMITATIONS
A
Not for use in atmospheres containing
less than 21% ±1% oxygen.
B
Not for use in atmospheres immediately
dangerous to life or health.
C
Do not exceed maximum use
concentrations established by
regulatory standards
D
Air-line respirators can be used only
when the respirators are supplied with
respirable air meeting the requirements
of EN 12021, AS/NZS 1715 or higher
quality.
E
Use only the pressure ranges and
hose lengths specified in the user’s
instructions
J
Failure to properly use and maintain
this product could result in injury or
death.
M
All approved respirators shall be
selected, fitted, used and maintained in
accordance with local government and
other applicable regulations.
N
Never substitute, modify, add or omit
parts. Use only exact replacement parts
in the configuration as specified by the
manufacturer.
O
Refer to user’s instructions, and/or
maintenance manuals for information
on use and maintenance of these
respirators.
S
Special or critical user’s instructions
and/or specific limitations apply. Refer
to page 13 (Breathing Air Pressure
Table) before donning.
1. Respirator Helmet
Assembly
2. Breathing
Tube
Assembly
and Flow
Control
Device
3. Breathing Air Line
FIGURE 1.1