9
Train each NOVA 1
®
user in the product’s use, application, inspection, maintenance, storage,
fitting, and limitations in accordance with the content of this Instruction Manual and the
approved flow control device instruction manual and standard or regulatory requirements.
Ensure that each intended user reads both these manuals.
Ensure that equipment is properly set up, used, and maintained.
Make sure that equipment is properly set up, inspected, fitted, used, and maintained,
including selection of the appropriate air filter cartridge and, when applicable, welding filter
shade adjustments, for the application.
Measure and monitor airborne contaminants in the work area.
Measure and monitor airborne contaminant levels in the work area in accordance with
applicable requirements. Make sure work area is well ventilated.
Ensure that abrasive used is suitable for abrasive blasting.
Check the material safety data sheets for manufacturers warnings and recommendations
and verify the blasting media conforms with applicable standards/regulations (e.g.
regarding respirable silica). Refer to rpbsafety.com/important-safety-information/ for links to
websites that can provide regulatory guidance.
If you have any questions, contact RPB
®
.
Call Customer Service Department:
Tel: 1-866-494-4599
Email: [email protected]
Web: rpbsafety.com
