12
NOVA
1
®
You taste, smell, or see contaminants inside the helmet.
You have any other reason to suspect that the respirator is not providing adequate protection.
PRODUCT CARE
Never place the helmet on hot surfaces. Do not apply paints, solvents, adhesives or self-adhesive
labels except as instructed by RPB
®
. This product may be adversely affected by certain chemicals.
Clean and disinfect with mild detergent and a soft cloth or a disinfectant wipe. See the “Respirator
Setup and Care” section for more specific cleaning instructions.
INSTRUCTIONS FOR SPECIFIC USES OR ENVIRONMENTS
Confined Spaces
If this respirator is used in confined spaces, ensure the area is well ventilated and that all
contaminant concentrations are below those recommended for this respirator. Follow all procedures
for confined space entry, operation, and exit as defined in applicable regulations and standards.
Abrasive Blasting
Do not use hazardous abrasives (e.g. those that violate applicable standards/regulations, such
as abrasives containing more than trace amounts of silica, lead, arsenic, etc.) - these could
result in serious injury or death. Consult your abrasive supplier and read the material safety
data sheets for the abrasives to be used to determine suitability for blasting applications.
PRODUCT USER SAFETY INSTRUCTIONS
CONTINUED
The Apparatus must be supplied with respirable air meeting the
requirements of EN 12021, AS/NZS 1715 or Higher Quality. The moisture content of the
breathable air should controlled within the limits in accordance with EN 12021, to avoid the
air freezing the apparatus. Do not use oxygen enriched air.
WARNING