Figure 8
3. Insert one of the core adapters into the
11
right end of the film core. For film with
poly-in (adhesive side is inside the web),
make sure the adhesive side is facing
upward. (Fig. 9)
Figure 9
4. Insert the film shaft into the roll of film
from the right side with the copper end last.
Align and insert the core adapter on the left
end of the film core.
Figure 10
5. Center the film on the shaft and lock it in
place with the locking core adapters
Figure 11
6. Carefully return the film shaft back into
place.
