background image

 

SAFETY PRECAUTIONS 

 
 
 

WARNING 

Failure to comply with any of the following safety procedures could result in serious 
injury.   
 
1.

 

Insure the unit is plugged into a properly grounded outlet with the correct voltage. 

2.

 

Only licenses electricians should service or repair the electrical wiring. 

3.

 

Keep flammable and wet objects away from the machine. 

4.

 

Place machine on a level sturdy surface. 

5.

 

Avoid excessive sunlight, humidity and temperatures. 

6.

 

Unplug the machine when moving it or when it's not in use. 

7.

 

Keep out of reach of children. 

8.

 

Only authorized maintenance and service technician are permitted to make repairs. 

9.

 

Do not cover the surface of the machine until the machine is completely cooled. 

10.

 

When cleaning the machine, don't use flammable sprays or materials. 

11.

 

Do not touch the rollers or allow foreign objects inside the machine. 

12. You can laminate by single film when the switch in the left cover is “O”. 
      ( Insure the machine drastically cold, press the button in the left cover be “ O ”,then 

you can laminate by single side. It is a damage for the paper to laminate by single side 
while the rollers up and low are heating all together.) 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

4

Содержание RSL2701S
















Отзывы: