ROXX B.FLEX, Руководство пользователя

Страница: 6 / 79

6
1.3. Technical warnsigns and explanation
In order to prevent the risk of an electric shock, under no circumstances remove the cover/back
or open the unit in any way! No user serviceable parts are inside. Service, maintenance and repairs
should only be done by qualified service personnel or the manufacturer.
Dangerous uninsulated voltage inside the device can cause an electrical shock when opened by
unqualified personnel.
Important operating and maintenance instructions apply!
Do not operate this device in tropical climates.
CAUTION! Intense LED light source! Risk of eye damage. Do not look into the light source
The housing surface of the spotlight can heat up to temperatures as high as 70 °C in regular use. Ensure
that it is not possible to come into contact with the housing unintentionally. Always allow sufficient time
for the lamp to cool down before dismantling, carrying out maintenance work or charging etc..
The fixture has an integrated, non-removable battery, do not attempt to remove the battery. Do not open
the headlamp. To replace the battery, take the device to an authorized service center.
Fully charge the battery again immediately after discharging. Batteries that are not fully charged lose
capacity and service life.
For short to medium-term storage of the headlamp, fully charge the battery.
If the headlamp will not be used for a longer period of time, use the "Storage" function inside the device
settings to charge the battery. This limits the maximum charging capacity to 40% and thus preserves
the life of the battery.
Do not charge the battery of the B.FLEX / B.FLEX mini headlamp at ambient temperatures below 0°C /
32°F and above 40°C / 104°F.
If the headlamps are charged inside a flightcase, the case lid must remain open during the entire charging
process in order to avoid heat accumulation.
User
Manual