21
Editor*
At Editor you have up to three customizable programs which can be defined and run from the menus.
Each of the three values contains twenty four user-definable scenes with its own values for RGBL (RAW) or RGB
(Calibrated) and shutter, playing continuously in a loop. Each scene has a definable fade-in time for the transition from
one color to the other and wait-time.
To define a program please press ENTER to access to main menu (level 1).
While using the UP / DOWN arrows, please select the menu item “Stand Alone” and confirm
by pressing ENTER.
Select “Editor” by using the up/down arrows and press ENTER.
Here at sub-menu (level 3) you can choose between Program 1-3, Dimmer and Stop Program.
Using the Up/Down arrows you can select program 1, 2 or 3 and confirm by pressing ENTER or step back by ESC.
After confirming your preferred program, you can now choose between Scene 1-24.
Select one of the scenes and press ENTER or step back by ESC.
At level 5 you can now set your color, shutter and fade / wait time in minutes and seconds. For creating a color jump
please set value for "Fade Time" to 0, and "Wait Time" to at least 1 second.
Once it´s set your first scene is programmed.
You can now jump back to level 3 by using ESC. Here your program will starts automatically.
For creating more scenes please use the same procedure.
To stop an active program please press ESC and select “Stop Program” at level 3 or "Stop Stand Alone" at level 2.
To start again, please re-select your preferred program, it will starts automatically again.
To adjust the master brightness for program 1-3, you can use the item “Dimmer” at level 3 and select between 000-
100 and confirm by ENTER or jump back by ESC.
*Note: Once "Color Calibration" is selected under "Color Settings" inside Stand Alone, only values for RGB
for the center LED are available here.
Using UP / DOWN arrows at homescreen Editor program can be directly changed according to the list.
For choosing the right strobe effect please follow the Strobe Channel from our DMX chart at the end of this
manual.
User
Manual
Menu
Level 1
DMX Mode
Stand Alone
Slave
Set-
tings
Stand Alone Mode
Level 2
Stop Stand Alone
Auto
Editor
Color Macro
Quick Color
Tunable White
User Color
Timer
Color Settings
Editor
Level 3
Program 1
Program 2
Program 3
Dim <0-
100
>
Stop Program
Program
Level 4
Scene 1
Scene 2
Scene 3
…max. 24 Scenes
Scene
Level 5
Red (Center)
Green (Center)
Blue (Center)
Lime (Center)
Red (Halo)
Green (Halo)
Blue (Halo)
Содержание B.FLEX
Страница 1: ...User Manual B FLEX B FLEX mini USER MANUAL ...
Страница 33: ...33 User Manual 7 TECHNICAL DATA DIAGRAMS 7 1 Technical drawings and measurements B FLEX 120 00 200 00 188 00 ...
Страница 34: ...34 User Manual 7 TECHNICAL DATA DIAGRAMS 7 1 Technical drawings and measurements B FLEX mini 120 00 140 00 ...