ROXX B.FLEX, Руководство пользователя

Страница: 12 / 79

12
4.3.1.1 DC Power
ROXX B.FLEX operates on 31V DC power supplies and B.FLEX mini on 14V.
Both single power supplies and multi power supplies are available, allowing up to 4 spotlights to be charged simul-
taneously.
4.3.1.2 Charging the battery, operating and storage
• As soon as the headlamp is connected to DC power and either the headlamp is switched off or the LED is not in
operation, the internal battery starts charging.
• The battery charge status is shown on the display both when the headlamp is on and when it is in standby mode.
• The charging time from 0% charge status to 100% charge status is approximately 5 hours at B.FLEX and 3 hours
at B.FLEX mini.
• The battery runtime is approx. 7.5 hours (B.FLEX) and approx. 5 hours (B.FLEX mini) for a two-color mix
(both colors at 100%). The battery runtime can be extended up to 24 hours by using the runtime function with
correspondingly reduced brightness.
• The headlamp automatically calculates the brightness based on the color setting and runtime used.
• After approximately 300 charging cycles (0% - 100%), the battery capacity is still approximately 70% of the
nominal capacity.
• The electronic Battery Management System protects against overcharging and deep discharge.
• The battery may only be replaced with original accessories by an authorized service center.
• Do not charge the battery of the B.FLEX / B.FLEX mini headlamp at ambient temperatures below 0°C and
above 40°C.
• When operating the B.FLEX / B.FLEX mini floodlight with mains voltage, the ambient temperature must not fall
below 0°C and must not 40°C.
• When operating with internal rechargeable battery, the ambient temperature must not fall below -20°C and must
not 40°C.
• Immediately recharge the battery completely after discharging. Batteries that are not fully charged lose capacity
and service life.
• For short to medium-term storage of the headlamp, fully charge the battery.
• If the headlamp will not be used for a longer period of time, use the "Storage" function inside the device settings
to charge the battery. This limits the maximum charging capacity to 40% and thus preserves the life of the battery.
• If the headlamps are charged inside a flight-case, be aware the case lid must remain open during the entire
charging process in order to avoid heat accumulation.
• When operating in a cold environment, battery life may be shorter than expected.
• Store the headlamp in a cool, dry place to allow optimal storage conditions for the battery.
User
Manual
B.FLEX
Single Power Supply
(Included) B.FLEX mini
Single Power Supply
(Included) B.FLEX
Touring PSU Set Mini
(Optional) B.FLEX mini
Touring PSU Set Mini
(Optional)