Roxell Vitoo Скачать руководство пользователя страница 5

page 2

Technically trained person

An expert who can assemble and maintain the installation 

(mechanically/electrically

), and resolve malfunctions. On

the basis of his/her technical training and experience, he/she has sufficient knowledge to be able to assess activities,

recognize possible dangers and rectify dangerous situations.

Storage

Put all parts to be assembled in a room or at a location where the not yet assembled components are protected against

weather influences.

Transport

Depending on the size of the parts and according to local circumstances and local legislation, the parts of the machine

have to be transported with a forklift.

The forklift must be operated by a qualified person and in accordance with the rules of good workmanship. When lifting

the load, always check if the center of gravity of the load is stable.

Dismantling

Dismantle the installation and its components in accordance with the environmental legislation of the country or the

local authorities applicable at that time. All functioning products and exchange parts must be stored and disposed of in

accordance with the applicable environmental regulations.

Environmental information for customers in the European Union

The European legislation requires that equipment marked with this symbol on the product or

packaging must not be collected with unsorted household waste.

This symbol indicates that the waste electrical and electronic equipment (WEEE) cannot be disposed

of in the regular household waste. We highly recommend that you bring your product to an official

collection point so that an expert can remove the waste electrical and electronic equipment. Inform

yourself of local legislation on separate collection of waste electrical and electronic equipment.

Respect the local regulations and never dispose of the product together with household waste.

Information about waste disposal - electrical/electronic material for companies

1.

In the European Union

If you have used the product for commercial purposes and you want to dispose of it, contact Roxell, who will give

you information about the return of the product. It is possible that you will have to pay a disposal charge for the

return and recycling. Small products (and small quantities) can be processed by the local collection agencies.

2.

In other countries outside the European Union

If you want to dispose of this product, contact the local authorities for information concerning the correct

disposal procedure.

The level of noise emission

The noise level of the installation in operation does not exceed 70 dB(A).

– General information                                                                                                                                                     Roxell –  – 0821

Содержание Vitoo



















Отзывы: