Rowse ULT 17 Скачать руководство пользователя страница 6

Страница: 6 / 86

SECTION A:

INTRODUCTION

To The Owner

General Outline Of This Manual

Congratulations on your selection of the Rowse

Ultimate V-Rake to aid you in your haying operation. This

operator’s manual will assist you in realizing the benefits

you can gain from using the Rowse Ultimate V-Rake.

The Rowse Ultimate V-Rake has been designed,

manufactured, and tested to make you another satisfied

Rowse customer.

You will find it very beneficial to read this entire

manual to have a thorough understanding of the

Ultimate V-Rake before taking it to the field. Also, keep

this manual handy for future reference. Become familiar

with the adjustments required to obtain maximum,

trouble-free, efficiency and performance.

Proper operation and care of the Ultimate V-Rake

contribute immensely to its successful performance. A

properly lubricated, adjusted and cared for implement

saves downtime, labor costs, fuel, and repairs.

Haying conditions will vary from year to year. Items

affecting conditions include amount of moisture, kind of

crop, etc. Therefore, the normal settings outlined in this

manual are really suggested starter settings. Adjustment

may need to be made to fit a particular raking situation.

Operation information contained in this manual will

aid in making the necessary adjustments. Consult your

Rowse Dealer concerning unusual field conditions or

special applications.

Your Rowse Dealer will be glad to answer any

questions you may have on the operation and care of

this product. Also, for parts and service, see your Rowse

Dealer. Always use genuine Rowse parts to ensure

proper fit and optimum performance.

Information in this manual is arranged under eight

main section headings.

Following the introduction, the steps for assembly

of the basic unit and optional equipment are discussed.

Then, important points in operating the Ultimate V-Rake

and optional equipment are covered.

Safety, service, and the troubleshooting guide give

additional operating information.

A parts list is also included in this manual. An index

in the back of the manual aids in finding information on

a specific item.

CAUTION

Read the Operator’s Manual.
Learn to operate this machine SAFELY.
Be alert. Observe ALL Safety Practices.
Machines can be hazardous in the hands of
an UNFAMILIAR, UNTRAINED or
COMPLACENT operator.
Don’t risk INJURY or DEATH.

Содержание ULT 17























































































Результаты поиска

Содержание ULT 17

Отзывы:

Похожие инструкции для ULT 17

Бренды по названию

Популярные бренды

Rowse ULT 17, Руководство оператора

Результаты поиска

Содержание ULT 17

Отзывы:

Похожие инструкции для ULT 17

Бренды по названию

Популярные бренды