Rowse ULT 17 Скачать руководство пользователя страница 19

Страница: 19 / 86

POSITIONING THE ULTIMATE V-RAKE

BACK TO TRANSPORT POSITION

USING THE “TOE-IN” FUNCTION

IMPORTANT: “Kicker Wheels” and “Wings” must be straight before bringing “Arms” in for transport.

1. Activate the tractor valve to raise the raking wheels. When just moving to another field behind the tractor you do

not need to replace the 1/4” hair pin clips as the tractor hydraulics will hold the wheels up.

2. If the Ultimate Rake is equipped with Kicker Wheels (three raking wheels in the center), select the ‘’yellow’’ toggle

switch (red light will come on). Activate the tractor valve and the three wheels will turn into transport position

(straight with the tongue.) If you hold the valve in this position after the wheels are straight for transport, the rear

gauge wheel of the kicker wheels will raise off the ground. NOTE: This feature is not for transport or to carry in

the field but to raise the wheels if backing up, if excessive crop has bunched up in back or to raise and clear pivot

tracks, etc. Shut off the “yellow” (option) function.

3. Select the “white” switch which controls the wing movement. With tractor moving slowly, operate valve

straightening the wings fully for transport. The bottom gauge on the wing should read “0”. Shut off “white” switch.

Both wing cylinders should be totally enclosed.

4. Actuate the #3 function ‘’Toe”, Blue Toggle of control panel. Red light should light up. Activate valve on tractor,

designated to control the rake functions. Positioning wheels should turn inward in front, this will assist in ease of

operation of Function 5.

5. Turn “Toe” function off and actuate Function #1 “Arm” toggle switch to on position. With tractor mov ing slowly

ahead, activate the tractor hydraulic valve in an intermittent (start and stop) mode. This will push the positioning

arms inward and rearward into transport position (4” x 24” cylinder on top of center platform should be totally

enclosed.). Both gauges on right leg should read “0”.

6. Shut “Arm” toggle switch off and activate Function #3 “Toe” function on again. Activate tractor valve to turn center

positioning wheels back to a straight position for transport. Shut “Toe” toggle switch off.

7. Attach transport stabilizer bars from front wings to center bracket if traveling a considerable distance or behind a

pickup.

Содержание ULT 17























































































Результаты поиска

Содержание ULT 17

Отзывы:

Похожие инструкции для ULT 17

Бренды по названию

Популярные бренды

Rowse ULT 17, Руководство оператора

Результаты поиска

Содержание ULT 17

Отзывы:

Похожие инструкции для ULT 17

Бренды по названию

Популярные бренды