37/44
3.6 Repacking for private transport purposes
Always pack the appliance in its original packaging for transportation to prevent
transport damage.
4.
Cleaning and Maintenance
4.1 Safety measures
P
Pull the mains plug out of the socket before servicing the appliance.
P
Only begin the maintenance or repair work once the appliance has cooled
down.
4.2 Cleaning
The appliance should be covered after each use to prevent contamination by
impurities.
Do not cover the appliance until it has fully cooled down.
If the appliance has nevertheless become dirty, observe the following notes during
cleaning:
P
Always clean the infra-red table radiant heater while cool.
P
Pull out mains plug before any work.
P
Only clean the appliance with a dry, soft cloth. Never use strong and/or
abrasive cleaning agents.
4.3 Maintenance
Note that only original parts may be used for repair and maintenance work. Contact the
ROWI Service Centre if need be (see Chapter 5).
GB
