Rover Seventy Five, Руководство пользователя

Страница: 150 / 209

Power Steering
149
3
Check & Top-up
Fluid specification: Use any fluid
to Dexron III specification. Fluids
manufactured to this
specification are suitable for use
in temperatures between -20° C
to +30° C (if climatic temperature
falls outside these limits, seek
advice from your dealer).
Care point: Take care not to spill
power steering fluid onto a hot
engine - a fire may result.
Check the fluid level every week. The engine should be
switched off with the system cold and the front wheels in the
straight ahead position before the level is checked.
Care point: Power steering fluid
will damage painted surfaces.
Soak up any spillage with an
absorbent cloth immediately and
wash the area with a mixture of
car shampoo and water.
Wipe the filler cap clean to prevent dirt from entering the
reservoir. Remove the filler cap and, using a clean lint-free
cloth, wipe the dipstick clean. Refit the cap fully and remove
again to check the fluid level. If necessary, top-up with a fluid
meeting Dexron III specification until the level is between
the upper and lower marks on the dipstick (see illustration).
DO NOT OVERFILL!
NOTE: The colour of commercially available power steering
fluids may differ from that used to fill the system during
manufacture. This is not a cause for concern.
H2683