Rover Seventy Five, Руководство пользователя

Страница: 24 / 209

Seats
23
1
DRIVER’S SEAT MEMORY FACILITY
*
DO NOT adjust the seats
while the car is moving.
Before activating the seat
memory and lazy seat functions,
ensure that the area
immediately surrounding the
seat is clear of obstructions and
that all occupants are clear of
moving parts.
Your car can memorise three different driver seating
positions. To store the positions in the system memory, the
starter switch must be turned to the first or second position.
Operating tip: If a pre-set is
selected accidentally, stop seat
movement by pressing any of the
seat control buttons.
Adjust the seat to the required position and store the settings
by pressing and holding the memory store switch (‘M’) and,
with the memory store switch still depressed, press and release
one of the pre-set buttons (‘I’, ‘II’ or ‘III’). Finally, release the
memory store switch; a single chime will sound to confirm
that the operation was successful.
NOTE: If the car is in motion, the
pre-set will need to be pressed
and held for the seat to move.
This is to prevent inadvertent
operation of the memory
pre-sets, which could cause the
seat to move into a position in
which the driver is unable to drive
safely.
To recall a stored position after the seat has been moved by
another driver, open the driver’s door and press the
appropriate memory pre-set button. The seat will return to
the position stored by that memory pre-set, a double chime
will sound to confirm that the operation is complete.
Lazy seats
The lazy seat facility enables the handsets or keys to be used
to recall seat positions, when you unlock the doors.
Press and hold the handset unlock button or turn and hold the
key in the unlock position, the driver's seat moves to the
position stored in pre-set 1. An alternative driver's setting can
be programmed using pre-set 2. As before, position the seat
and programme pre-set 2 then, when the spare key is used to
activate ‘Lazy seats’, pre-set 2 will be selected.
H2755