Rover Seventy Five, Руководство пользователя

Страница: 182 / 209

Bulb Replacement
181
4
Outboard headlights (dipped beam)
Replacement bulb: H7 55 watt.
Turn the front wheels to full left or right lock. This will
provide room for you to reach into the wheel arch to remove
the headlight access panel.
NOTE: When replacing the bulb,
ensure the squared section of the
bulb mounting plate (4) is
vertically aligned. Insert the new
bulb fully and hold in this
position while fitting the wire
securing clip, and before
attaching the electrical
connector.
Using a screwdriver, rotate the turnbuckle a quarter turn to
left or right to release the access panel. Push the panel up as
far as it will go and then disengage the bottom of the panel to
remove (see upper inset). It is then possible to reach the back
of the combined headlight/sidelight unit.
1. With the access panel removed, reach behind the
headlight and pull to remove the rubber cover.
2. Pull the electrical connector from the back of the
headlight bulb.
3. Unhook the wire securing clip.
4. Remove the bulb.
H3257
2
3
4
1