Rover LS 33T Скачать руководство пользователя страница 2

Страница: 2 / 24

Customer Support

Please do NOT return the machine to the retailer or dealer without first contacting the Customer Support Department.

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of

this machine, you can seek help from the experts. Choose from the options below:
◊

Visit us on the web at www.mtdproducts.com

See How-to Maintenance and Parts Installation Videos at

www.mtdparts.com/KnowledgeCenter

◊

Call a Customer Support Representative at 1300 951 594

◊

Write to MTD Products Australia Pty Ltd. • P.O. Box 376 • Dandenong. Vic. • 3175

Thank you for purchasing an MTD

Log Splitter. It was carefully

engineered to provide excellent performance when properly

operated and maintained.
Please read this entire manual prior to operating the equipment.

It instructs you how to safely and easily set up, operate and

maintain your machine. Please be sure that you, and any other

persons who will operate the machine, carefully follow the

recommended safety practices at all times. Failure to do so could

result in personal injury or property damage.
All information in this manual is relative to the most recent

product information available at the time of printing. Review

this manual frequently to familiarize yourself with the machine,

its features and operation. Please be aware that this Operator’s

Manual may cover a range of product specifications for various

models. Characteristics and features discussed and/or illustrated

in this manual may not be applicable to all models. We reserve

the right to change product specifications, designs and

equipment without notice and without incurring obligation.

If applicable, the power testing information used to establish

the power rating of the engine equipped on this machine can be

found at www.opei.org or the engine manufacturer’s web site.
If you have any problems or questions concerning the machine,

phone your local authorized MTD service dealer or contact us

directly. MTD’s Customer Support telephone numbers, website

address and mailing address can be found on this page. We want

to ensure your complete satisfaction at all times.
Throughout this manual, all references to

right

and

left

side of the

machine are observed from the operating position
The engine manufacturer is responsible for all engine-related

issues with regards to performance, power-rating, specifications,

warranty and service. Please refer to the engine manufacturer’s

Owner’s/Operator’s Manual, packed separately with your

machine, for more information.

Thank You

Before setting up and operating your new equipment, please

locate the model plate on the equipment and record the

information in the provided area to the right. You can locate

the model plate by looking at the side flange of the engine

mounting plate. This information will be necessary, should you

seek technical support via our web site, Customer Support

Department, or with a local authorized service dealer.

odel

uMber

erial

uMber

MTD Products Australia Pty Ltd.

Postal Address: PO. Box 376 Dandenong. Vic. 3175

Business Address: 6 Zenith Road, Dandenong. Vic. 3175 and 97 Trade Street
4178

Email Address: [email protected]

Customer Service Phone:1300 951 594

To The Owner

Safe Operation Practices ........................................ 3

Assembly & Set-Up .................................................. 7

Controls & Features ................................................11

Operation ................................................................12

Maintenance & Adjustment .................................15

Service .....................................................................17

Troubleshooting .....................................................18

Replacement Parts ................................................ 20

Warranty ..................................................Back Cover

Table of Contents

Содержание LS 33T

























Результаты поиска

Содержание LS 33T

Отзывы:

Похожие инструкции для LS 33T

Бренды по названию

Популярные бренды

Rover LS 33T, Руководство оператора

Результаты поиска

Содержание LS 33T

Отзывы:

Похожие инструкции для LS 33T

Бренды по названию

Популярные бренды