Rover 75 Saloon, Руководство пользователя

Страница: 20 / 285

20
Seats
DRIVER'S SEAT MEMORY FACILITY*
Before activating the seat memory and lazy seat functions,
ensure that the area immediately surrounding the seat is clear
of obstructions and that all occupants are clear of moving parts.
Your car can memorise three different driver seating positions. To
store the positions in the system memory, the starter switch must
be turned to the first or second position.
Adjust the seat to the required position and store the settings by
pressing and holding the memory store switch (‘M’) and, with the
memory store switch still depressed, press and release one of the
pre-set buttons (‘I’, ‘II’ or ‘III’). Finally, release the memory store
switch; a single chime will sound to confirm that the operation was
successful.
NOTE: If the car is in motion, the pre-set will need to be pressed and held
for the seat to move. This is to prevent inadvertent operation of the memory
pre-sets, which could cause the seat to move into a position in which the
driver is unable to drive safely.
To recall a stored position after the seat has been moved by another
driver, open the driver’s door and press the appropriate memory
pre-set button. The seat will return to the position stored by that
memory pre-set, a double chime will sound to confirm that the
operation is complete.
Lazy seats
The lazy seat facility enables the handsets to be used to recall seat
positions, when you unlock the doors.
Press and hold the handset unlock button to move the driver's seat
to the position stored in pre-set 1. An alternative driver's setting
can be programmed using pre-set 2. As before, position the seat
and programme pre-set 2 then, when the spare handset is used to
activate ‘Lazy seats’, the seat position stored in pre-set 2 will be
selected.
NOTE: Operation of the lazy seat facility will be cancelled if the driver’s
door is opened.
H2826a