Roundup 9210880, Руководство пользователя

Страница: 13 / 28

13 P/N 1011263 Rev. C 12/15
Cleaning the Top Cooling Fan and
Electrical Housing (Annually)
Follow these steps to clean the top fan.
1. Turn the power switch to the OFF
position. The toaster enters a cool-
down mode and will automatically
shut down when complete. Unplug
the power cord.
2. Remove the optional Top Feeder (if
Present). Remove the Bun Feeder.
3. Facing the front of the toaster, move
to the right Side Panel. Remove the
2 top screws from the right Side side
Panel and lower the panel (Figure
16).
4. Use a plastic brush or similar tool to
brush all 5 fan blades from beneath.
Be sure to remove all debris.
5. Carefully clean any debris from the
inside floor of the control compart-
ment and from all electrical connec-
tions. Be sure to remove any grease,
lint, or debris from these areas.
6. Attach the right Side Panel and
secure with screws.
7. Resasemble the unit.
Cleaning the Rear Cooling Fan
and Electrical Housing (Annually)
Follow these steps to clean the rear fan.
1. With the unit off, remove the 3 rear
screws securing the rear access panel
and carefully lower the panel (Figure
17).
2. Use a plastic brush or similar tool to
brush all 5 fan blades free of debris.
3. Carefully clean any debris from the
floor of the toaster and from all elec-
trical connections. Be sure to remove
any grease, lint, or debris from these
areas.
4. Attach the rear panel and secure
with the 3 screws.
NOTE: Be careful not to pinch wiring
upon closing the rear panel.
5. Plug in the power cord, turn the
power switch on, and test the toaster
for proper operation.
Figure 16. Accessing Top Cooling Fan
Figure 17. Accessing Rear Cooling Fan