Marshall Amplification HST13, Руководство пользователя

Страница: 1 / 21

OWNER'S MANUAL
MODEL HST13 - VERTICAL TOASTER
MANUFACTURER'S INTRODUCTION GENERAL SPECIFICATIONS
Height: 23.250"
Width: 19.875"
Depth: 15.250"
208V Single Phase 18.5 Amps
Electrical:
240V Single Phase 18.5 Amps
6 ft. 3 wire including ground,
with NEMA L6 -20P Plug
(Plug furnished by others on
Power Cord:
international units.)
130 lbs.
The Marshall High Speed Vertical Toaster produces a grilled
effect on the cut side of sandwich buns. The buns are
inserted at the top of the unit and are pressed against a
heated platen surface, which is covered by a replaceable
toaster platen sheet. The spacing between the heated grill
and the conveyor is adjustable to accommodate different
thicknesses of buns. The buns are discharged onto a product
slide at the bottom of the unit. The system is high speed and
also variable in speed. Additionally, the heat controls are pre-
set at factory, which eliminates unauthorized tampering with
heat settings. The flexibility of this toaster is unmatched
allowing operators to produce the hottest buns in the shortest
time.
Weight:
135168CH7 RV100599
Copyright © 1999 Marshall Air Systems, Inc.
All Rights Reserved.
Supplier Name: MARSHALL AIR SYSTEMS, INC.
419 Peachtree Drive South
Address:
Charlotte, NC 28217
Serial #:
Date Received:
Date Installed:
Telephone #: 704-525-6230
Toll Free #: 800-722-3474 Customer Service
Fax #: 704-525-6229
Service Referral #: 800-722-3474
Local Service Name:
Local Service #:
Conveyor Speed
Setting: