2
•
Installation
X935-24-00 Rev 108 V894CSH/V894WSH High-Security Cameras
Installation
Unpacking and Inspection
All Vicon equipment is inspected and tested before leaving the factory. It is the carrier’s responsibility to
deliver the equipment in the same condition in which it left the factory.
Inspection for Visible Damage
Immediately inspect the cartons upon delivery. On all copies of the carrier’s freight bill, make a note of any
visible damage.
Make sure the carrier’s agent (the person making the delivery) signs the note on all copies of the bill. If the
agent does not have claim forms, contact the carrier’s office.
Inspection for Concealed Damage
As soon as possible after delivery, unpack the unit and inspect it for concealed damage. Do not discard the
carton or packing materials. If the unit is damaged, contact the carrier immediately and request forms for filing
a damage claim. Make arrangements for a representative of the carrier to inspect the damaged equipment.
If the equipment must be returned for repair, follow the Shipping Instructions at the end of this document.
Physical Installation
The V894CSH series is designed to fit into a corner where two walls and a ceiling meet. It may be fastened to
either or both walls or to the walls and the ceiling. The V894WSH series is designed for wall mounting. Refer
to Figure 1. Cable access is provided on one side.
The camera may be rotated 360º and be tilted slightly to
give a higher or lower angle of view. The varifocal lens allows for lens adjustment capability.
The wall/ceiling material must provide suitable strength to support the weight of the unit (2.75 lb/1.2 kg). Be
sure the area around the selected location is clear of obstacles (such as steel beams, headers, pipes,
electrical wiring, etc.) that would interfere with mounting. Video and power cables must be routed to the
installation location.
Before beginning installation, read the Coaxial Cable Recommendations at the end of this manual and verify
that the accessory pack contains the items listed in Table 2.
