background image

14  

  Vicon Standard Equipment Warranty 

X935-24-00  Rev 108 V894CSH/V894WSH High-Security Cameras 

Vicon Standard Equipment Warranty 

Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and workmanship under 
Normal Use from the date of original retail purchase for a period of three years, with the following exceptions: 
 
1. 

VCRs, all models: Labor and video heads warranted for 120 days from date of original retail purchase. All other 
parts warranted for one year from date of original retail purchase. 

2. 

Video monitor CRT (cathode ray tube) and LCD monitors, all models: One year from date of original retail 
purchase. 

3. 

Uninterruptible Power Supplies: Two years from date of original retail purchase. 

4. 

VDR-304 and VDR-308 Recorder Series: One year from date of original retail purchase. 

5. 

Normal Use excludes prolonged use of lens and pan-and-tilt motors, gear heads, and gears due to continuous 
use of “autopan” or “tour” modes of operation. Such continuous operation is outside the scope of this warranty. 

 

Date of retail purchase is the date original end-user takes possession of the equipment, or, at the sole discretion of the 
Company, the date the equipment first becomes operational by the original end-user. 
 
The sole remedy under this Warranty is that defective equipment be repaired or (at the Company’s option) replaced, at 
Company repair centers, provided the equipment has been authorized for return by the Company, and the return shipment 
is prepaid in accordance with policy. 
 
The Company will not be obligated to repair or replace equipment showing abuse or damage, or to parts which in the 
judgment of the Company are not defective, or any equipment which may have been tampered with, altered, misused, or 
been subject to unauthorized repair. 
 

Software supplied either separately or in hardware is furnished on an “As Is” basis. Vicon does not warrant that 
such software shall be error (bug) free. Software support via telephone, if provided at no cost, may be 
discontinued at any time without notice at Vicon’s sole discretion. Vicon reserves the right to make changes to 
its software in any of its products at any time and without notice. 

 

This Warranty is in lieu of all other conditions and warranties express or implied as to the Goods, including any 
warranty of merchantability or fitness and the remedy specified in this Warranty is in lieu of all other remedies 
available to the Purchaser. 

 
No one is authorized to assume any liability on behalf of the Company, or impose any obligations on it in connection with 
the sale of any Goods, other than that which is specified above. In no event will the Company be liable for indirect, special, 
incidental, consequential, or other damages, whether arising from interrupted equipment operation, loss of data, 
replacement of equipment or software, costs or repairs undertaken by the Purchaser, or other causes. 
 
This warranty applies to all sales made by the Company or its dealers and shall be governed by the laws of New York 
State without regard to its conflict of laws principles. This Warranty shall be enforceable against the Company only in the 
courts located in the State of New York.  
 
The form of this Warranty is effective August 15, 2007.  

 
THE TERMS OF THIS WARRANTY APPLY ONLY TO SALES MADE WHILE THIS WARRANTY IS IN EFFECT. THIS 
WARRANTY SHALL BE OF NO EFFECT IF AT THE TIME OF SALE A DIFFERENT WARRANTY IS POSTED ON THE 
COMPANY’S WEBSITE, WWW.VICON-CCTV.COM
. IN THAT EVENT, THE TERMS OF THE POSTED WARRANTY 
SHALL APPLY EXCLUSIVELY. 
 
 
 
 
 
 
 

Vicon Part Number: 8006-9010-03-03   Rev 807 

 
 

Содержание Roughneck V894WSH























Отзывы: