ROTOTILT Komatsu PC210, Перевод оригинальной инструкции

Страница: 6 / 36

© Rototilt Group AB 2018-06-27
Planeringsskopa, rotation 360°
Rotation, 360° Rotation, 360°
Planeringsskopa, tilt 40°
Tilt, 40° Tilt, 40°
Left Handle
1. Rotation, clockwise
2. Rotation, anti-clockwise
Right Handle
3. Tilt, right cylinder extension
4. Tilt, left cylinder extension
4
3
2
1
4
3
2
1
EN English
!
IMPORTANT
- When using Rototilt
®
the base machine
pedals must not be used to further increase the oil flow, as
this can result in serious damage to Rototilt
®
.
Operating Rototilt
®
The ICS control system permits tilt,
rotation, grapple and an extra function to
be used in parallel and to be regulated
proportionally.
ICS works in parallel with any pedals on
the base machine. When using Rototilt®
the base machine’s pedals must not be
used to regulate the oil flow.
A calibrated ICS system provides each
system with its optimal flow. The Rototilt®
can be seriously damaged if the pedals
on the base machine are used to further
increase the flow.
Carefully check the positions and
functions of the switches.
The appearance and placement of
switches may vary depending on the
base machine and handle.
The selected function opens the
equivalent valve directional on Rototilt®.
Activate the ICS control
system
The system is activated when the base
machine is in the ignition position.
Speed
The speed of all functions can be
adjusted.
The adjustment is made via Display,
Speed settings menu.
The speed can be adjusted in general
for all functions. The speed can also be
adjusted separately for each individual
function.
Operation
2200441_ _0000