© Rototilt Group AB
2018-06-27
2
1
1
2
3
EN
English
Quick coupler with SecureLock
Operation in the same way as the quick
coupler without SecureLock; see above.
When the quick coupler is opened a
warning is given that the locking cylinder
has been retracted and is in the open
position.
When the quick coupler is closed, the
message indicates that the locking
cylinder is extended and is in a securely
locked position.
Inspect the quick coupler locking function
A warning text appears on the display if
the tool is not coupled correctly.
If you do not intend to couple a tool, the
warning must be acknowledged.
First press the green function key and
release it.
Now press the OK function key. The
buzzer warning signal stops.
Return to the start menu using any key.
A visual warning will be shown at
30-second intervals as long as Rototilt®
is running without a tool and remains
visible until any key is pressed again.
Quick coupler QuickChange™
Operation is the same as for the quick
coupler; see above.
When the quick coupler is opened a
warning is given that the locking pistons
have been retracted and are in the open
position
When closing the attachment, the first pin
(1) is engaged, followed by pin (2) and
finally the locking pistons (3).
The quick coupler locking function cannot
be closed until both pins in the attach-
ment frame are correctly positioned.
The position on the quick coupler’s three
sensors are monitored continuously.
All sensors are shown in green on the
display when a tool is correctly coupled.
Inspect the quick coupler locking function.
2200441_ _0000
