Rotolight TITAN X2, Руководство пользователя

Страница: 9 / 56

9
SYS (System) contains all of the customisable key system settings and read only information including
temperature settings, colourspace, brightness mode etc. You can also perform system updates via the USB port
within this menu.
SFX (Cinematic Special Effects, ‘CineSFX™’) contains over 20 fully customisable special lighting effects, developed
by Rotolight and visual effects veteran, Stefan Lange. You can edit a lighting gel or create a custom colour in one of
the Home menus, and combine it with an edited effect in SFX to create your own customised lighting FX.
FLASH allows you to use Titan™ as a High Speed Sync photographic flash unit, utilising the built in library of
lighting gels or custom created RGBW colours . Titan™ has a built-in Skyport 2.4Ghz HSS receiver capable of
syncing at up to 1/8000th of a second, with colour tuneable RGBWW flash and modelling light, capable of running
at any repeated frame rate, with zero recycle time. There is also an Exposure Effects (X-FX) section for customisable
multi–exposure effects, where you can control delay, repetitions and gaps between flash events for creative
photography.
DMX
allows you to set the base DMX channel, the channel mode (i.e. number of channels used to control Titan™
over DMX) and control Titan™ via the built-in Lumenradio TimoTwo wDMX chip, Rotolight wDMX, or wired DMX
port from a lighting control desk. You can set the system parameters via RDM (Remote Device management) (this
feature will be introduced in Q1 2021).
Each of these five master menus has ten dedicated radio preset buttons (in two switchable banks of five), where
you can store your edited settings (50 presets in all). You just tap the preset button to recall, hold the button to
store, and double tap to open a dialogue page where you can name the preset and save or load it to/from the USB
stick (feature to be introduced in Q1 2021). The Titan™ graphic user interface is designed to be intuitive to use, yet
totally comprehensive in the functionality on offer. Navigate, touch, rotate and refine your Titan™ controls, with the
assurance of having a back button to correct any mistakes.
TOUCH TO SELECT
In firmware V2.0 onwards, there are now four ways to adjust the controls on Titan:-
1. Control knobs – you can rotate these to adjust the selected parameter
2. Press, Hold and Turn – if a knob parameter has a grey triangle behind it , this indicates there is a second function
to this rotary control if you ‘press, hold and turn’.
3. Touchscreen, many controls are directly editable by using sliders on the touchscreen
4. New ‘Touch to Select’ allows you to select a parameter on the touchscreen and adjust it using the knob below. If
you want to revert to the original parameter, simply click the knob to unlatch the ‘Touch to Select’, or touch a new
parameter to control.
We hope you will find this simplifies your workflow with Titan.
Future features
Important:
any feature displayed as a greyed out (i.e. not active) GUI menu item or icon will be available in future
updates. All future updates will be announced to our customer base.