Rotolight TITAN X2, Руководство пользователя

Страница: 27 / 56

27
‘TrigSync’ and custom flash duration and triggering
Rotolight have developed a special duration and control mode, aimed at the cinematographic industry. It
enables Flash mode to support high frame rate, super Slo-Mo production, called ‘TrigSync’. If TrigSync is selected
in the Duration control (rotate duration to the far left and TrigSync will be displayed after the 1/2500th value, then
both Triggering and Duration are controlled from an analogue electronic input signal via the minijack sync port.
It can be triggered at virtually any frame rate, and duration is also controlled by the length of each trigger signal,
and can be as short as 20uS (20 millionths of a second).
NB : when TrigSync is selected in ‘Duration’ wireless trigger signals from the Elinchrom HSS receiver are ignored.
Wired Flash Sync using your camera’s PC Sync port
To trigger the flash from the PC Sync port on your camera (wired operation), connect a PC sync cable from your
camera’s PC sync port to the 3.5mm mini jack on the Titan™ port plate. If your camera does not have a PC sync
port, then you can purchase the optional ‘Rotolight Accessory Shoe to PC’ adapter and the PC flash sync cable,
which converts your accessory shoe into a PC socket
NB - PC sync is limited to your camera’s internal sync speed
(X-Sync) (usually 1/60th up to 1/250th). IT IS NOT HIGH SPEED SYNC.
Recommended triggers
To avoid the need for additional cables or receivers the following transmitters work natively with the inbuilt
Elinchom skyport receiver :
Rotolight HSS Transmitter (Canon, Nikon, Sony, Olympus/Panasonic, Fuji)
Elinchrom Transmitter PRO (supports HSS) (Canon, Nikon, Sony, Olympus/Panasonic, Fuji)
Elinchrom HS Transmitter Plus (not HSS) (Canon, Nikon, Sony, Olympus/Panasonic, Fuji
Third-party triggers
Alternatively, you can connect third party flash receivers or transceivers which have a PC sync or 3.5mm flash
output, with a PC sync/3.5mm cable to the 3.5mm mini jack flash trigger input jack located on the port plate of
Titan™. Connect the transmitter to your camera accessory shoe (such as Godox X1T/R, Phottix, Sony, Pocket Wizard,
etc) and follow the instructions supplied with your transmitter.
Recommended third party transmitters include:
Godox X1T (use with the Godox X1R receiver)
Pixel King Pro-Sony, Canon, Nikon
Flashpoint R2
Phottix ODIN II (HSS) – Canon, Nikon, Sony
PocketWizard (HSS): FlexTT5, and FlexTT6 support High Speed Sync (HSS) for Canon and FP Sync for Nikon.
Cactus VI II (HSS): Fuji, Canon, Nikon, Pentax, Olympus, Panasonic
Please note: most transmitters require a setting enabled to output a flash sync signal via the PC sync port, please
ensure this setting is enabled on your transmitter/receiver