![Rotolight TITAN X2 Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/rotolight/titan-x2/titan-x2_user-manual_1491683022.webp)
22
‘FILM’ (Old Cinema Projector)
The Film effect is designed to simulate the flickering light coming from a celluloid film projector in a movie
theatre. Create a base colour for this effect in the HOME menu then go to SFX/FILM to combine the customized
colour with your edited effect. You can start / stop (or pause/fade to black) the effect by clicking the centre knob, or
touching the 'TRIGGER' on the touchscreen or using an external trigger from the sync/trigger port, DMX or wDMX.
Rotating the centre knob changes the flicker SPEED. Ideally set the flicker SPEED quite slow so that a camera
running at 24 or 25 frames per second can easily record it. Rotate the right knob to adjust brightness of the effect.
Store your customized effect in one of the SFX User Presets (hold to store / tap to recall).
‘SPARK WELD’ (Arc Welding Light)
This effect simulates the light from an electric arc welding torch. Select the SPARK WELD effect on the SFX
carousel. Clicking the centre knob or tapping the touchscreen TRIGGER starts/stops the effect (or pause – fade
to black), or you can also start/stop the effect via the external trigger port or via the Skyport or DMX. Rotating the
centre knob varies the SPEED of the effect. A key characteristic of the arc welding process is the electric blue arc
flame interspersed with vivid orange sparks, and this effect emulates this beautifully.
‘PAPARAZZI’ (Press Photography Flash Mob)
This effect simulates a flash mob of Paparazzi photographers. Select a suitable base colour from HOME menu
(usually a CCT at 5600K) and set your diffusion and core brightness here. Go to SFX and enter the effect by
selecting the PAPARAZZI symbol on the SFX carousel. Tap the touchscreen 'TRIGGER' or click the centre knob,
or tap the PAPARAZZI symbol on the carousel, or trigger the effect externally via the flash/trigger port or via
the Skyport or DMX. Rotate the centre knob to control the speed of the effect. Rotate the right knob to change
brightness.
‘CHASE’ (Moving or Throbbing Light Emulator)
This effect allows Titan™ to wirelessly control a line of up to 12 Rotolight Titans to simulate passing streetlights.
This effect requires some settings in the DMX menu as follows:- Master Titan™ should be set to DMX/IN-OUT (Input
– Local Control) (Output Sync-SFX) and Network ‘ROTOLIGHT’, in DMX/OVERVIEW set the Master to Roto wDMX
Channel 1. Any connected slaves should be set to DMX/IN-OUT (Input wDMX-In) and Network ‘ROTOLIGHT’.
The Slaves should be set in DMX/OVERVIEW/Roto-wDMX Channel to base addresses in clusters of 16 (i.e. channels
1, 17, 33, 49, 65, 81, 97, 113, 129, 145, 161, 177, 193).
However, If you are using CHASE to generate a THROB effect, (or any other SFX effect) and you want an unlimited
number of lights to do the same thing, then the Master & Slave lights should all be set to the same Roto-wDMX
channel DMX address.
Содержание TITAN X2
