Rotolight TITAN X2, Руководство пользователя

Страница: 13 / 56

13
THE HOME MASTER MENU
When you select the touch button labelled ‘HOME’, it will take you to the page where you can select one of five
colour editing submenus below:
1. CCT
- when this submenu is selected you can set the white balance. Using the left knob, you can change the
brightness. Using the centre knob or the CCT touchscreen slider you can adjust the colour temperature, from
3,000 to 10,000 kelvin. Please notice that there is a grey triangle behind the CCT window, this indicates that there
is a second function to this knob if you press and turn. This second function controls the green / magenta balance
(also available as a touch slider function on screen). Finally the right hand knob controls the SmartSoft™ electronic
diffusion. You can store or recall your custom CCT settings using any of the HOME menu radio preset buttons (hold
the preset button to store, tap to recall).
2. RGBW
– when this submenu is selected you can create a custom colour, or edit a filter, or source match sample.
Use the left knob to set the amount of red, use the centre knob to set the amount of green, and the right knob to
set the amount of blue. All three knobs have grey triangles behind indicating that there are second functions to
all three knobs. If you press and turn the left knob you can adjust the overall brightness of the Titan™, if you press
and turn the centre knob you adjust the amount of whites (from the CCT page) that you are adding to the custom
colour – this will have the effect of desaturating the RGB colour. Finally press and turn the right knob to control the
SmartSoft™ electronic diffusion. You can store the RGBW custom colour settings to any of the HOME menu radio
preset buttons by holding the preset button.
NB – You can edit a filter or source match setting in RGBW and store the customised result in a preset button.
3. HSI
- (Hue, Saturation, Intensity) when this submenu is selected you can create a custom colour using the left
knob (Hue), or swipe on the touchscreen slider colour display. The colours are represented as degrees from 0-360,
and you mix from red (0 degrees) to green (120 degrees) through to blue (at 240 degrees) back to red (at 360/0
degrees). In this mode you are only ever mixing two of the RGB colours. The centre knob adjusts Saturation (i.e.
adding white to pastelise the selected colour). The right knob adjusts overall fixture intensity (brightness). Finally
press and turn the right knob to adjust SmartSoft™. You can store the HSI custom colour settings to any of the
HOME menu radio preset buttons by holding the preset button. There is a preview display of the selected colour
below the HSI colour bar.
4. XY – when this submenu is selected you can create a custom colour by swiping the marker to a custom colour
on screen (the CIE ‘sharksfin’ curve of visible colours is shown), and the selected colour is also shown on the
preview window in the screen. You can use the left knob to enter an ‘X’ colour co-ordinate, or the centre knob to
enter a ‘Y’ colour co-ordinate. The right knob allows you to adjust the fixture intensity and pressing, holding and
turning the right knob adjusts the SmartSoft™ electronic diffusion. You can store the XY custom colour settings